Strasbaugh 7 AF Grinder, 8"
- 3 Phase
- 480V
- Can run 8" Silicon
- Grinding area section 5200 LBS = 2’358 kg
- Handling area section 2300 LBS = 1’043 kg
Utility Requirements:
Electrical:
- 230 Vac / 208 Vac
- Three Phase, 60 Hz
- 45 Full Load Amps (50 Hz available)
Clean Dry Air:
- 25 SCFM at 90 PSI minimum (25 SCFM = 707,92 Liters Per Minute (L/min))
Exhaust:
- 250 CFM at 1/2-inch of water static pressure
- one 5-inch duct (250 CFM = 424.7525m3/h)
Grinding Coolant:
- D.I. water; 6 GPM at 30 PSI minimum, 50 PSI maximum (6 gal/m = 1.3627 m³/h)
Spindle Coolant:
- Municipal or chilled water; 1 GPM at 30 PSI minimum, 80 PSI maximum (1 gpm = 3.7854 lpm)
Industrial Waste:
- 2-inch pipe
Vacuum:
- 5 CFM at 25 inches Hg (5 cubic feet per minute = 141.58 liters per minute at 846 mbar)
Spare Parts:
- (2) P/N: 106195 Brain boards
- (1) P/N: 106561 Cleaning brush motor
- (1) P/N: 107414 PC Control module
- (2) P/N: 108694 Tooth belt spindles Z
- (2) P/N: 110656 Filters
- (2) P/N: 110657 Filters
- (2) P/N: 110671 T Valves (Rinse dry)
- (2) P/N: 111014 Humphrey electro valves
- (2) P/N: 111015 Humphrey electro valves
- (2) P/N: 111017 Valves (Vacuum supply)
- (2) 111166 Valves (Vacuum supply)
- (2) 111185 Solenoid valves
- (15) 112865 Chucks screws
- (13) 112873 Wheels screws
- (2) 119040 Wheel dressing pads
- (1) 172246 Probe tip
- (1) 172275 Grind seal
- (5) 172506 Robot arm lip seals
- (2) 219184 Valves 031SS5004
- (2) 219573 Seals
- (2) 223275 Chuck unions
- (2) 223527 Probe bellows
- (1) 223562 Filter element vapor
-(2) 224118 Chuck brushes
- (3) 226113 Teflon T Valves
- (6) 238078 Probe screws
- (3) 300917 Fine wheels
- (2) 334563 Chucks, 6"
- (1) Robot controller
- (1) 224083B Clean station brush
- (1) 20001190 Robot rotary actuator
- (1) TA100016 Bus communication board
- (1) Aligner
1999 Vintage